Low Noise - The ZINGYOU BM-800 features extremely quiet self-noise, In technical terms: a noise level of just 16 dB(A). Thus, it is perfectly suited for vocals and audio drama productions in high definition as well as for demanding samples production and instrumental recordings
Stability - The BM-800 shock mount's spider suspension isolates your studio microphone from handling and floor noise by decoupling it from the rest of your room. This results in clearer recordings with less unwanted low-frequency artifacts. The BM-800 shockmount accommodates microphones from 55mm to 60mm in diameter. It screws into any standard mic stand
Cardioid Pattern - Cardioid is the most widely used pattern in professional microphones. It provides reliable performance in both stage and studio settings. As you move around to the sides and bottom of the microphone, the cardioid pattern becomes less sensitive and will pickup less sound. A good way to visualize this is to think of the cardioid pattern as an apple, with the microphone as the stem. The closer you are to the 'stem', the less sensitive the mic is
Application – Great in both Vocal and Instruments, wide frequency response makes it an ideal mic to capture vocals, acoustic guitars, acoustic pianos and even strings as the condenser is able to take an accurate snapshot and capture all the subtleties and nuances inherent in these instruments
Cardioid-only, large-diaphragm tube condenser mic
Low-noise operation meets high-headroom SPL handling
Delivers warm, clear bass, detailed midrange, and a silky high end
Perfect for vocals, musical instruments, podcasting, voiceovers, interviews, field recordings
Frequency range: 20 to 20,000 Hz
Sensitivity: -34 dB±2 dB (0 dB=1V/Pa at 1kHz)
Max. SPL: 132 dB (at 1kHz≤1% T.H.D)
Equivalent noise level: 16 dB-A
Signal/noise ratio: 78 dB
Impedance: <=200 ohms
Recommended load impedance: >= 1000 ohms
Connector: 3-pin XLR to IEC
Cable Length: 8.2 ft/2.5M
Dimensions: ø50 x 160 mm (Dia. 1.9 x 6.3 in.)
Net Weight: 400g
1 x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1 x Microphone Suspension Scissor Arm Stand
1 x Foam Protective Anti-wind Cap Cover
1 x Podcasting Condenser Microphone
1 x Table Mounting Clamp
1 x Upgrade Sound Card
1 x Microphone Pop Filter
1 x Metal Shock Mount
1 x USB Cable
Free shipping on all orders in the USA.
Our amazing support team is here to help.
Simply return it within 30 days for an exchange.
We ensure secure payment and accept Stripe, Visa, Mastercard, Amex & Paypal.